Guide to setting up and using the HUAWEI Wifi Mobile Hotspot

1. Ensure that the Battery and SIM card are fitted inside of the WiFi Hotspot unit (this may have already been done for you).  The bottom cover can be removed using your fingernail to reveal the battery.  The battery lifts out to reveal the SIM card slot.
2. Connect the USB power cable included in the box to the WiFi Hotspot unit, and then plug this in to a USB power plug to charge the unit (as you would a mobile phone), you can also use a spare USB port on a laptop or desktop computer to charge the unit.  You can now power on the WiFi Hotspot unit by holding the power button down for a few seconds, the lights will come on to show the unit is powering up.
3. Give the WiFi Hotspot unit 2 minutes to fully power on, you should now be able to see a new WiFi network being advertised to your devices, the name (SSID) and password are printed on the label under the battery cover